|
|
For use with airbrush, spray, gun coatings, duracoat, cerakote, and other spray paints.
Stencils are heat resistant on both metal and polymers. They do not shrink on ABS and Polymers when flash curing. They leave little to no adhesive behind so no messy clean up.
What you get.
2 – 9×14″ Sheets One single design as pictured in our main image. Nothing more, nothing less.
Specifications: Length: 14″
Width: 9″
For angled surfaces: When shaping around corners use larger stickers and allow half of the sticker to lay on each plane. If small sections of the design overlaps a corner it may not adhere well. Use scissors to trim any excess that doesn’t want to adhere.
Optimal temperature for application is 65 deg F to 110 deg F. Humidity will affect application. Store sheets in a cool dry location. High humidity will cause the sheets to curl.
Useful Tools:
Exacto knife – Can be used to remove sticker and also to form sticker in tight angles. STENCILING STEPS: 1. Basecoat your project with a good camouflage color. 2. Clean off the project to remove any dust or paint residue. Be sure to have clean hands and avoid touching the adhesive side during application. 3. Apply the stickers to your project. Using a sharp edge such as an exacto knife or razor blade will make it easier to remove and apply the stencils. 4. After applying the stencils to your project paint directly at the object. Avoid spraying at angles. 5. Allow your project to completely dry before removing the stencil stickers. 6. Apply a clear protective coating to your project. |
