For use with airbrush, spray, gun coatings, duracoat, cerakote, and other spray paints. They can be flash baked up to 20min at 250F.
Stencils are heat resistant on both metal and polymers. They do not shrink on ABS and Polymers when flash curing like the yellow avery paper. They leave little to no adhesive behind so no messy clean up.
What you get.
2 – 9×14″ stencils in two unique designs as pictured in our main image. Nothing more, nothing less.
Specifications:
Material: High Temp Vinyl film
Thickness: .25mm
Length: 14″
Width: 9″
For angled surfaces: When shaping around corners use larger stickers and allow half of the sticker to lay on each plane. If small sections of the design overlaps a corner it may not adhere well. Use scissors to trim any excess that doesn’t want to adhere.
Useful Tools:Exacto knife – Can be used to remove sticker and also to form sticker in tight angles.
Scissors – To trim excess stencilSTENCILING STEPS:1. Basecoat your project with a good camouflage color.2. Clean off the project to remove any dust or paint residue. Be sure to have clean hands and refrain from touching the adhesive side during application.
Scissors – To trim excess stencilSTENCILING STEPS:1. Basecoat your project with a good camouflage color.2. Clean off the project to remove any dust or paint residue. Be sure to have clean hands and refrain from touching the adhesive side during application.
3. Apply the stickers to your project. Using a sharp edge such as an exacto knife or razor blade will make it easier to remove and apply the stencils.
4. After applying the stencils to your project paint directly at the object. Avoid spraying at angles.
5. Heat Cure or allow parts to dry, remove stickers.
6. Apply finish if required.
© Acid Tactical LLC
All images are copyright protected under U.S. & South Carolina Laws.
Acid Tactical LLC will take any necessary civil action to protect intellectual property.
Acid Tactical LLC will take any necessary civil action to protect intellectual property.
